# HestiaCP Install Problems: Port, PHP, Quotas

**URL:** <https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679>\
**Category:** Install & Set-Up\
**Created:** [December 1, 2025, 9:42pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679 "2025-12-01T21:42:46Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![leandrom](https://forum.hestiacp.com/letter_avatar_proxy/v4/letter/l/eada6e/32.png) [@leandrom](https://forum.hestiacp.com/u/leandrom)\
**Post date:** [December 1, 2025, 9:42pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679/1 "2025-12-01T21:42:46Z")

</div>

I have same issue.  
I recently installed Hestia using the custom command generated on the site [https://hestiacp.com/install.html](https://hestiacp.com/install.html).  
During installation I specified port **8443** , **multi‑PHP** , and **filesystem quota**.

None of these options were effective:

- The panel still responds on the default port **8083**

- Only **PHP 8.3** was installed (no multi‑PHP support)

- Filesystem quota is not active

Additionally, **phpMyAdmin does not load** , returning a **FORBIDDEN** error.

Is there a problem with the installation script?

Environment: **Ubuntu 24.04, VPS KVM2 (Hostinger)**

---

<div class="post-metadata">

**Author:** ![sahsanu](https://forum.hestiacp.com/user_avatar/forum.hestiacp.com/sahsanu/32/9318_2.png) [@sahsanu](https://forum.hestiacp.com/u/sahsanu)\
**Post date:** [December 1, 2025, 9:56pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679/2 "2025-12-01T21:56:55Z")

</div>

> [@leandrom](#):
>
> I specified port **8443**

Port 8443 is already used by Apache2 web backend so you should use another one like 8083, 2083, etc.

Show the output of these commands:

```t
v-list-sys-config json | jq -r '.[]|.BACKEND_PORT'
grep listen /usr/local/hestia/nginx/conf/nginx.conf

```

> [@leandrom](#):
>
> Only **PHP 8.3** was installed (no multi‑PHP support)

If you didn’t specify the versions you want to install, it only installs the default one (PHP 8.3).

You can add new PHP versions from Web UI or via command line:

```t
v-add-web-php 8.2
v-add-web-php 8.4

```

> [@leandrom](#):
>
> Filesystem quota is not active

Show the output of these commands:

```t
cat /etc/fstab
quotaon -p / /home
repquota -va

```

> [@leandrom](#):
>
> **phpMyAdmin does not load** , returning a **FORBIDDEN** error.

How are you trying to access? Using the ip or the hostname?

---

<div class="post-metadata">

**Author:** ![leandrom](https://forum.hestiacp.com/letter_avatar_proxy/v4/letter/l/eada6e/32.png) [@leandrom](https://forum.hestiacp.com/u/leandrom)\
**Post date:** [December 1, 2025, 10:20pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679/3 "2025-12-01T22:20:03Z")

</div>

Thanks for reply.

For reference, the installation command was:

> bash hst-install.sh --port ‘8443’ --lang ‘pt-br’ --hostname ‘mail.mydomain.tld’ --username ‘myuser’ --email ‘my-email@mydomain.tld’ --password ‘mypass’ --multiphp ‘8.3,8.4’ --quota yes

But right after the installation I noticed that the panel was responding on the default port, only php8.3 was available, and the filesystem quota was disabled in the settings.

Regarding PHPMyAdmin, I clicked the “phpmyadmin” button directly from the panel and the link opened using the hostname:  
[https://mail.mydomain.tld/phpmyadmin/](https://mail.mydomain.tld/phpmyadmin/)

Initially, I believe I made a mistake by adding the domain _mail.mydomain.tld_ as a regular website. I thought it was necessary to install SSL. Later, I removed this site from the panel.

The outputs are:

```auto
            listen 8083 ssl;
            listen [::]:8083 ssl;

```

and

LABEL=cloudimg-rootfs / ext4 discard,commit=30,errors=remount-ro 0 1  
LABEL=BOOT /boot ext4 defaults 0 2  
LABEL=UEFI /boot/efi vfat umask=0077,X-fstrim.notrim 0 1  
quotaon: Mountpoint (or device) / not found or has no quota enabled.  
quotaon: Mountpoint (or device) /home not found or has no quota enabled.

---

<div class="post-metadata">

**Author:** ![sahsanu](https://forum.hestiacp.com/user_avatar/forum.hestiacp.com/sahsanu/32/9318_2.png) [@sahsanu](https://forum.hestiacp.com/u/sahsanu)\
**Post date:** [December 1, 2025, 10:31pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679/4 "2025-12-01T22:31:36Z")

</div>

> [@leandrom](#):
>
> –multiphp ‘8.3,8.4’

Check whether you have both installed or only 8.3:

```auto
 v-list-sys-php

```

> [@leandrom](#):
>
> I believe I made a mistake by adding the domain _mail.mydomain.tld_ as a regular website

The mistake is adding `mail.mydomain.tld` as the hostname. Hestia uses `mail` and `webmail` subdomains when creating the mail domain.

> [@leandrom](#):
>
> LABEL=cloudimg-rootfs / ext4 discard,commit=30,errors=remount-ro 0 1  
> LABEL=BOOT /boot ext4 defaults 0 2  
> LABEL=UEFI /boot/efi vfat umask=0077,X-fstrim.notrim 0 1  
> quotaon: Mountpoint (or device) / not found or has no quota enabled.  
> quotaon: Mountpoint (or device) /home not found or has no quota enabled.

Ok, quota is not enabled, something happened during the install. Could you please run this command as root?

```t
v-add-sys-quota

```

And repeat the commands:

```t
cat /etc/fstab
quotaon -p / /home
repquota -va

```

---

<div class="post-metadata">

**Author:** ![leandrom](https://forum.hestiacp.com/letter_avatar_proxy/v4/letter/l/eada6e/32.png) [@leandrom](https://forum.hestiacp.com/u/leandrom)\
**Post date:** [December 2, 2025, 6:30pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679/5 "2025-12-02T18:30:21Z")

</div>

> [@sahsanu](#):
>
> `v-list-sys-php`

There’s just 8.3:

```auto
VERSION

8.3

```

> [@sahsanu](#):
>
> `v-add-sys-quota`

worked fine:

`quotaon: Your kernel probably supports ext4 quota feature but you are using external quota files. Please switch your filesystem to use ext4 quota feature as external quota files on ext4 are deprecated.`  
`/dev/sda1 [/]: group quotas turned on`  
`/dev/sda1 [/]: user quotas turned on`

Thank you for your help.  
I will reinstall everything, using the correct hostname (srv01.mydomain.tld). It was the copilot’s idea to use mail.mydomain.tld to, according to him, get everything right for sending email through the VPS.  
This time I will use port 2083 and I will double-check PHP versions and disk quota. I will report any errors here again. Thank you very much.

---

<div class="post-metadata">

**Author:** ![leandrom](https://forum.hestiacp.com/letter_avatar_proxy/v4/letter/l/eada6e/32.png) [@leandrom](https://forum.hestiacp.com/u/leandrom)\
**Post date:** [December 2, 2025, 9:34pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679/6 "2025-12-02T21:34:42Z")

</div>

Update:  
I reinstalled everything and now it’s OK.

My command was:

```auto
bash hst-install.sh --port '2083' --lang 'pt-br' --hostname 'srv02.mydomain.tld' --username 'adminhcp' --email 'myemail@mydomain.tld' --password 'mypass' --multiphp '8.4,8.3' --quota yes --force

```

By default, Hestia didn’t create any WEB domain.  
phpmyadmin is responding at [https://srv02.mydomain.tld/phpmyadmin/](https://srv02.mydomain.tld/phpmyadmin/)  
But I didn’t find a default URL to access webmail. Shouldn’t be working at [https://srv02.mydomain.tld/webmail/](https://srv02.mydomain.tld/webmail/) ?

Or webmail URL only works for E-MAIL domains manually configured? There’s no default web webmail URL?

Last doubt: can I add [https://srv02.mydomain.tld](https://srv02.mydomain.tld) as a WEB domain or this could break things?

---

<div class="post-metadata">

**Author:** ![sahsanu](https://forum.hestiacp.com/user_avatar/forum.hestiacp.com/sahsanu/32/9318_2.png) [@sahsanu](https://forum.hestiacp.com/u/sahsanu)\
**Post date:** [December 2, 2025, 9:59pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679/7 "2025-12-02T21:59:48Z")

</div>

> [@leandrom](#):
>
> I reinstalled everything and now it’s OK.

Great!

> [@leandrom](#):
>
> Or webmail URL only works for E-MAIL domains manually configured? There’s no default web webmail URL?

Webmail only works for manually added mail domains. There isn’t a default mail domain.

> [@leandrom](#):
>
> Shouldn’t be working at [https://srv02.mydomain.tld/webmail/](https://srv02.mydomain.tld/webmail/) ?

No. When you add a mail domain, you will be able to access the webmail using `https://webmail.domain.tld` or `https://mail.domain.tld`

> [@leandrom](#):
>
> can I add [https://srv02.mydomain.tld](https://srv02.mydomain.tld) as a WEB domain or this could break things?

You should already have it added, otherwise this URL wouldn’t work: `https://srv02.mydomain.tld/phpmyadmin/`

---

<div class="post-metadata">

**Author:** ![system](https://forum.hestiacp.com/uploads/default/original/1X/d9a5b68bf50ced83e880b56452e592b204761b19.png) [@system](https://forum.hestiacp.com/u/system)\
**Post date:** [January 1, 2026, 10:00pm UTC](https://forum.hestiacp.com/t/hestiacp-install-problems-port-php-quotas/20679/8 "2026-01-01T22:00:16Z")

</div>

Closed on January 1, 2026, 10:00pm UTC

This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
